Shiftkits Australia 12 volt Tach Adapter, for converting an ECU 5 volt output signal into a 0-12 volt square wave signal for connecting aftermarket devices requiring a standard 12 volt tach signal.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 10 x 10 x 3 cm |
Only logged in customers who have purchased this product may leave a review.
Shiftkits Australia Inductive Tachometer Adapter
This adapter is used to convert an ECU tacho output signal into a high voltage tacho signal for connection to factory tachometers that are normally triggered directly from the coil negative terminal.
This adapter is suitable for 80 Series Landcruisers with aftermarket ecu's and will run the standard Petrol tachometer
This digital fuel gauge interface module allows you to use ANY resistance based fuel sender to run the factory Ford XD / XE / XF fuel gauge,
For example if you have changed your fuel tank and sender sender to an aftermarket unit then this interface module will allow you to interface the factory gauge to the aftermarket sender.
digital fuel gauge interface module allows you to use ANY resistance based fuel sender to run ANY resistance based gauge,
for example if you have changed your fuel sender to an aftermarket sender then this interface module will allow you to interface the factory gauge to the aftermarket sender.
The interface module is user programmable and requires a laptop with a serial port to program the sender and gauge information to the module.
Shiftkits Australia Tach Adapter, for converting a 36-1 toothed wheel signal into a 0-12v square wave signal for connecting aftermarket devices requiring a standard tach signal to a coil-on-plug engine, only for use with 36-1 toothed wheel.
This module reads directly from the crank trigger wheel.
Output default to suit 6 cyl tacho. Optionally we can set the output to suit v8 tacho, please advise when ordering.
Suitable for BA/BF/FG falcon.
Optionally available for other makes/models ie Nissan Patrol ZD-30, or contact us for custom application
Shiftkits Australia Tach Adapter, for converting a 36-1 toothed wheel signal into an inductive ignition signal for connecting factory single coil based tachometers to a coil-on-plug engine, only for use with 36-1 toothed wheel. Output to suit 6 cyl tacho.
Suitable for BA/BF/FG falcon engines.
Reviews
There are no reviews yet.